Honda Power Equipment WB20XT4
$549.00
Key Features
New/Used New
Usage0 Miles
Availability
In Stock
LocationAll Seasons Honda
Stock #
5175780
VIN
WABT-5175780
Condition
Excellent
Bar Length0.0
Blade Length0.0
Cutting Width0.0
Horsepower0.0
Product Features
Description
2" general purpose water pump
Key Features
- 164 gal./min. capacity
- Durable silicon carbide mechanical seal
- Cast iron volute and impeller
Features
- Easy starting Honda OHV commercial engine: The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
- Durable silicon carbide mechanical seal: The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
- 4 vane high efficiency impeller: The WB20's exclusive, Honda-designed 4 vane impeller offers improved performance and high efficiency.
- Cast iron volute: The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
- Heavy duty full frame protection: Protects the pump, while offering a convenient tie down location for transport.
- Isolation mounted engine and pump: High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
- Protected by Honda Oil Alert®: Protects the pump by shutting the engine off when low oil is detected.
- 3 year residential/commercial warranty: You can rest easy, knowing your pump is covered from top to bottom for 3 full years.
- Large strainer: The strainer allows up to 8 mm (5/16 in.) solids to pass through, helping to prevent clogging.
Specifications
- Engine: GX120
- Displacement: 118cc
- Bore and stroke: 2.4 in. x 1.7 in.
- Compression Ratio: 8.5:1
- Oil Alert: Std
- Pump Type: Centrifugal, Self-priming
- Volute: Rigid Mounted Cast Iron
- Impeller: 4 Vane Cast Iron
- Mechanical Seal (Pump case / impeller): Silicon Carbide/Silicon Carbide
- Priming time: 110 sec @ 16.4 ft.
- Drive system: Direct
- Discharge capacity: 164 gpm
- Suction port diameter: 2 in. NPT
- Discharge port diameter: 2 in. NPT
- Total head lift: 105 ft.
- Suction head lift: 25 ft.
- Maximum pressure: 45 psi
- Solids handling: N/A
- Dimensions (LxWxH): 19.3 in. x 14.4 in. x 16.5 in.
- Dry weight: 44 lb.
- Fuel Capacity: 0.53 gal
- Run Time @ Max Discharge: 1.7 hr
- Strainer Part #: 78325-YG3-000
- Residential Warranty: 3 years
- Commercial Warranty: 3 years
- CA Compliant: Yes
NOTES:
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.Engine
Engine Manufacturer | Honda |
Engine Displacement | 118cc |
Bore and Stroke | 2.4 in. x 1.7 in. |
General
Pump Style | Centrifugal, Self-priming |
Impeller | 4 Vane Cast Iron |
Drive System | Direct |
Discharge Capacity | 164 gpm |
Discharge Port Diameter | 2 in. NPT |
Suction Diameter | 2 in. NPT |
Head Lift | 105 ft. |
Suction Head Lift | 25 ft. |
Max Pressure | 45 psi |
Weight | 44 lb. |